Standard products

Our standard sensors –
quality in series.

You need reliable and flexible measuring technology immediately? No problem with our standard models. We offer a wide range of sensor solutions that can be used anywhere, from test benches and medical technology up to highly complex industrial products. And all our standard products have something in common: Thanks to our patented magnetostrictive technology, they measure contactless, wear-free and precisely. With our sensors you can determine torque, force, shear and bending directly and accurately.

The advantages of our standard products at a glance


  • Quality Made in Germany
    We produce all our sensors at our main site in Oberhaching, Bavaria, Germany
  • Very fast delivery
    We can deliver the desired sensors within two weeks
  • Plug & Play
    Our technology requires no external measuring amplifiers and can be easily integrated into your products
  • Contactless measurement
    The NCTE sensors measure magnetostrictively - without contact and without wear. Hence they do not require maintenance
  • Great precision
    Our standard products determine torques with high accuracy
  • High resilience
    Whether at extreme temperatures or strong vibrations - our sensors work reliably

For more information about our technology go to here

Your own standard –
our individual measuring sensors for you

Name Nominal torque Rotational speed Precision Download
Series 2000 2,5 – 500 ≤ 5.000 < ± 1% Data Sheet STEP-Model
Series 2300 1 – 100 ≤ 10.000 < ± 0,5% Data Sheet STEP-Model
Series 3200 10-100 ≤ 10.000 < ± 0,2% on request on request
Series 3000 & Serie 4000 50 – 2.000 (3000er Serie)
50 – 1.000 (4000er Serie)
≤ 10.000 < ± 0,2% (3000)
< ± 0,1% (4000)
Data Sheet 3000
Data Sheet 4000
STEP-Modell 3000er
STEP-Modell 4000er
Series 5000 10.000 – 25.000 ≤ 5.000 < ± 0,5% Data Sheet on request
Series 7000 3.000 – 5.000 ≤ 3.600 < ± 0,5% Data Sheet STEP-Modell

SERIES 2000 –
Your low-cost introduction to torque measurement

Inexpensive, reliable, easy to integrate: With the Series 2000 you can measure torques quickly and easily - both statically and dynamically. The sensors are mechanically connected via a round or square shaft. Their accuracy amounts to 1% and they provide an analogue output signal of 0.5 V.
Main areas of application for the 2000 Series
  • Test benches
  • Production lines (e.g. end-of-line testing)
  • Teaching
Scope of delivery
  • Sensor as ready-to-connect unit including 5 m cable
  • Feather keys (round shaft)
  • Calibration certificate
Technical data
  • Nominal torque: 2,5 Nm to 500 Nm, bidirectional
  • Speed: ≤ 5.000 rpm
  • Precision: ≤ ±1 %
  • Protection class: IP50, IP65
On request, our Series 2000 also works in potentially explosive areas
Optionally we offer the series 2000 also for areas that are subject to explosion hazard. In accordance with the ATEX guidelines of the European Union, this applies to zone 2; we will inform you of further zones upon request. Ask us directly if you wish to know more.

SERIES 2300 – the price/performance winner

The 2300 Series measures torques statically or dynamically in real time at an unbeatable price/performance ratio. You may order the shaft either round or square. We may configure the sensors individually for you if, for example, you need an angular sensor or the higher protection class IP65. Signal outputs of our 2300 Series are equally flexible: 0-10 V, 4-20 mA, CAN bus or USB. The USB port comes with the appropriate NCTE software and you may display the measured data directly on a screen.
Main areas of application for the 2300 Series
  • Testing facilities of the automotive industry
  • Climatic chambers (with exceeding of the dew point)
  • Process monitoring
Scope of delivery
  • Sensor as ready-to-connect unit including 5 m cable
  • Feather keys (round shaft)
  • Calibration certificate
Technical data
  • Nominal torque: 1 Nm to 100 Nm, bidirectional
  • Speed: ≤ 10.000 rpm
  • Precision: ≤ ±0,5 %
  • Protection class: IP50, IP65

Series 3200

The 3200 series has been specially developed for the confined space conditions that prevail in test benches. This allows existing systems to be easily updated. The extremely compact dimensions allow easy retrofitting or implementation into existing systems, e.g. the sensor can be installed in front of screwdrivers and the exact torque of each screwdriving operation can be measured. Compared to strain gauge based sensors, the Series 3200 impresses with its completely non-contact, maintenance- and wear-free measuring system.
Main areas of application for the 3200 Series
  • Labs
  • Test facilities
  • Quality assurance
Scope of delivery
  • Sensor as ready-to-connect unit including 5 m cable
  • Feather keys (round shaft)
  • Calibration certificate
Technical data
  • Nominal torque: 10 Nm to 100 Nm, bidirectional
  • Speed: ≤ 10.000 rpm
  • Precision: ≤ ±0,2 %
  • Protection class: IP50

Series 3000 and 4000 – our precision champions among sensors

Both our Series 3000 and the identically designed Series 4000 have been developed for highest precision tasks, such as those required in medical equipment. The sensors of both series measure particularly reliably and accurately (0.2% in the 3000 series and 0.1% in the 4000 series). Both variants can determine torques statically and dynamically in real time. Shafts are available as round or square types. In addition, we can configure the sensors individually for you and, for example, offer an angular sensor. Increasing the protection class to IP65 is no problem either.
Main areas of application for the 3000/4000 Series
  • Labs
  • Test facilities
  • Quality assurance
Scope of delivery
  • Sensor as ready-to-connect unit including 5 m cable
  • Feather keys (round shaft)
  • Calibration certificate
Technical data
  • Nominal torque (Series 3000): 50 Nm to 2.000 Nm, bidirectional
  • Nominal torque (Series 4000): 50 Nm to 1.000 Nm, bidirectional
  • Speed (both series): ≤ 10.000 rpm
  • Precision (Series 3000): ≤ ±0,2 %
  • Precision (Series 4000): ≤ ±0,1 %
  • Protection class (both series): IP50, IP65

Series 5000 - precise and reliable even at maximum forces

We have developed our 5000 series to measure particularly high torques in excess of 10,000 Nm. As a special design this sensor can detect up to 150,000 Nm. As usual, our technology works contactless and very reliably. The 5000 Series can measure static and dynamic torques and put out the results directly to you. We adapt the sensor to your requirements: Optionally, we offer a customer-specific nominal torque, angular sensor or speed sensor and the higher protection class IP65. Signal outputs of the 5000 series are also versatile: You may choose between 0-10 V, 4-20 mA, CAN bus and USB. Along with the USB output you will get our NCTE software, which displays the measured data on a connected screen in real time.
Main areas of application for the 5000 Series
  • Railway
  • Process monitoring of heavy cargo/container handling
Scope of delivery
  • Sensor as ready-to-connect unit including 5 m cable
  • Calibration certificate
Technical data
  • Nominal torque: 10.000 Nm and 15.000 Nm, bidirectional
  • Speed: ≤ 2.500 rpm
  • Precision: ≤ ±0,2 %
  • Protection class: IP50

  • Precision: ≤ ±0,5 %
  • Protection class: IP50, IP65
  • Series 7000 - extremely robust, extremely resilient: Full sensor power

    Special challenges require special measuring technologies. This is why we have developed the 7000 Series - particularly robust torque sensors that work perfectly even at high nominal torque ranges (3,000 Nm to 5,000 Nm) and are therefore ideally suited for demanding applications, for example in agriculture. Our system measures torques statically and dynamically in real time. We configure our sensors of the 7000 series according to your ideas: For example with additional power take-off shafts, sleeves or the higher protection class IP65. For signal output we are offering 0-10 V, 4-20 mA, CAN bus or USB. Along with the USB port option, we supply you with our suitable NCTE software, which enables direct data analysis on a screen - simply by plug & play.
    Die wichtigsten Einsatzbereiche für die Serie 7000
    • Automotive engineering (off-highway, agriculture, agriculture)
    • Test benches
    • Production monitoring
    Scope of delivery
    • Sensor as ready-to-connect unit including 5 m cable
    • Calibration certificate
    Technical data
    • Nominal torque: 3.000 Nm to 5.000 Nm, bidirectional
    • Speed: ≤ 3.600 rpm
    • Precision: ≤ ±0,5 %
    • Protection class: IP50, IP65
    Your contact

    NCTE Sales Team

    T +49 89 665 619-0
    sales@ncte.de

    ACCESSORY

    In addition to our sensors, we offer a range of accessory products:
    Product Name Item number Download Product information
    NCTE USB Software
    -
    NCTE software for the USB output
    Software
    NCTE readout box
    400010-ATS001
    Compact readout box for all NCTE sensors
    Data Sheet
    User manual
    Quick Start Guide
    Software
    STEP-Model
    Measuring software for readout boxfür Auslesebox
    400020-ATS001
    NCTE Software für Drehmomentmesswellen, inklusive USB Ausgang
    Data Sheet
    User manual
    Series 2000 sensor bracket
    400006-ATS100
    2,5 – 17,5 Nm
    400006-ATS101
    75 – 250 Nm
    STEP-Model
    5 meter connection cable
    400006-ATE001
    Serie 2000
    999999-ATE167
    Serie 2300
    400007-ATE011
    Serie 3000
    Serie 4000
    400012-ATE048
    Serie 5000
    400012-ATE048
    Serie 7000
    Serie 7500
    USB connecting cable
    400015-ATE100
    Serie 2300
    400012-ATE010
    Serie 5000
    400012-ATE010
    Serie 7000
    Serie 7500
    Your contact person

    Daniel Röser
    Sales Manager

    T +49 89 665 619-38
    daniel.roeser@ncte.de