Standard products

Inexpensive, reliable, easy to integrate: With the Series 2000 you can measure torques quickly and easily - both statically and dynamically. The sensors are mechanically connected via a round or square shaft. Their accuracy amounts to 1% and they provide an analogue output signal of 0-5V, 0-10V, ±5V or ±10V.

The 2300 Series measures torques statically or dynamically in real time at an unbeatable price/performance ratio. The series is available with round shaft. We may configure the sensors individually for you if, for example, you need an angular sensor. Signal outputs of our 2300 Series are equally flexible: 0-10 V, 4-20 mA, CAN bus or USB. The USB port comes with the appropriate NCTE software and you may display the measured data directly on a screen.

Both our Series 3000 and the identically designed Series 4000 have been developed for highest precision tasks, such as those required in medical equipment. The sensors of both series measure particularly reliably and accurately (0.2% in the 3000 series and 0.1% in the 4000 series). Both variants can determine torques statically and dynamically in real time. Shafts are available as round or square types. In addition, we can configure the sensors individually for you and, for example, offer an angular sensor.

We have developed our 5000 series to measure particularly high torques in excess of 10,000 Nm. As a special design this sensor can detect up to 15,000 Nm. As usual, our technology works contactless and very reliably. The 5000 Series can measure static and dynamic torques and put out the results directly to you. We adapt the sensor to your requirements: Optionally, we offer a customer-specific nominal torque, angular sensor or speed sensor and the higher protection class IP65. Signal outputs of the 5000 series are also versatile: You may choose between 0-10 V, 4-20 mA, CAN bus and USB. Along with the USB output you will get our NCTE software, which displays the measured data on a connected screen in real time.

Special challenges require special measuring technologies. This is why we have developed the 7000 Series - particularly robust torque sensors that work perfectly even at high nominal torque ranges (3,000 Nm to 5,000 Nm) and are therefore ideally suited for demanding applications, for example in agriculture. Our system measures torques statically and dynamically in real time. We configure our sensors of the 7000 series according to your ideas: For example with additional power take-off shafts, sleeves or the higher protection class IP65. For signal output we are offering 0-10 V, 4-20 mA, CAN bus or USB. Along with the USB port option, we supply you with our suitable NCTE software, which enables direct data analysis on a screen - simply by plug & play.